Carmatech NEMESIS NIPS (Nemesis Interlocking Projectile System) Muzzlebrake Kit (4 pieces)

£149.95 inc. VAT

Out of stock

Categories: , Tag: Brand: Carmatech Engineering square logoCarmatech Engineering
Started in 2010, Carmatech Engineering Inc. (CEI) is a mechanical engineering and product design company that utilizes engineering fundamentals to develop products under the CEI label. Since July of 2010 CEI has been working to refine and perfect the SAR12/ SAR12C for paintballers everywhere. Designed in house by Carmatech Managing Director, these specialist markers are made and assembled in small batches almost to order. Every marker is tested for consistency and ranged in using Carmatechs own dedicated Supremacy paintball scope. Carmatech is also very well known for its Nemesis barrel.  This barrel was designed to specifically work with First Strike rounds (FSR).  They also offer an amazing optic for use with FSR, the Supremacy Scope.  This too was designed specifically for use with FSR. Everything Carmatech produce is geared to precision performance for accuracy in paintball and the Nemesis rifled barrel range is no exception. Every barrel starts as a block of aluminium which is then machined down to a finished product. This ensures the straightest barrel possible and the rifling is Carmatechs own patient screw that is designed to perfectly match the FSR projectile from First Strike.


The new Carmatech NIPS – Nemesis Interlocking Projectile System ensures a more accurate shot image in which it is the trajectory of the projectile again narrowed before leaving the barrel and stabilising it. This effect is particularly evident when shooting at very long distances. Runs with NIPS upgrade are even more precise than the already very precise Carmatech Nemesis runs.

In addition, the shooting noise is muffled by the new bore, i.e. the marker becomes a bit quieter, which makes it even easier for snipers to remain undetected.

The NIPS system is delivered with 3 Muzzlebrakes in the drilling sizes .6855 (+/- 0.005), .6895 (+/- 0.005) and 6935 (+/- 0.005), as well as a screw-on thread protection cap, which at the same time gives the Muzzlebrake an even more beautiful look gives.

In the rear part of the Muzzlebrakes, there is a thread with which the NIPS Muzzlebrakes can be screwed onto every Carmatech Nemesis barrel, as well as other barrels with identical front threads.

If you have too much tolerance between barrel and bullet/paintball, you can, for example, screw up to 3 NIPS Muzzlebrakes in a row. Through this gradual narrowing, the bullet’s trajectory is then gently centred until the bullet emerges from the barrel with significantly less lateral movement. This ensures a more even and more accurate shot pattern.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.